Existing users, 
User Name jbucholtz
Member Since 0000-00-00
Total number of Feedback Posts: 16
Total number of comments: 5
Last 10 Feedback Posts by jbucholtz [ Search for All ]
Apple iLife Support 8.2 (Mac OS X)
Software update ran again after the install of 8.2, as it always does after any install. Odd that it then read that 8.2 was installed instead of no new software available. I quit software update, relaunched it and ran it again. Then it gave me the correct message. No problems that I can tell right now though. [alert admin]
Post a comment | More Info | 1 of 2 users found this helpful
Tuesday, February 12 2008 @ 12:00 AM PST
LaCie LightScribe Labeler 1.0.3 (Mac OS X)
A newer version (1.1) has been available as a free download since 2.26.06. It seems to be much more stable than 1.0.3. Templates are not much etter though. Link is at: http://www.lacie.com/download/drivers/LS_Labeler_1.1_Update.dmg [alert admin]
Monday, March 27 2006 @ 06:00 PM PST
Linksys befsr41/befsr11/befsru31 1.46 (Mac OS 9, Mac OS X)
Follow up post to my 7/7/2004 02:22PM PST
For me this fixed connectivity problems. I had been losing net access 3 to 5 times daily prior to this update. Either a hard reboot of the router and cable modem or a release/renw through the browser interface always took care of it but it should not have happened that many times DAILY. For this update I used the browser interface and upgraded from there. It upgraded without incident and I now have NOT had to reset the router for over 72 hours which is a record of sorts. [alert admin]
Friday, July 09 2004 @ 01:34 PM PDT
Linksys befsr41/befsr11/befsru31 1.46 (Mac OS 9, Mac OS X)
I have been resetting my router via the browser interface at least 3-5 times daily for the past few months. VERY annoying when transferring large files and connectivity is lost during the transfer. After having my ISP out to check incoming connection status (cable connection) they informed me that all was OK and the problem was on "my end". I sat down was ready to email Linksys tech support about the problem but decided to check VT first. For me the update to 1.46 applied without incident. It now remains to be seen if my connection will be more stable. I will follow up in a few days. [alert admin]
Post a comment | More Info | 1 of 1 users found this helpful
Wednesday, July 07 2004 @ 02:22 PM PDT
Logitech Control Center 1.2 (Mac OS X)
Kent1 - yes, you can set the wheel to double click. Select the wheel button in the top of the configuration frame and the configure click tab in the bottom of the pane. Select the double click radio button and your done. This version has worked fine for me with no problems at all. [alert admin]
Wednesday, March 10 2004 @ 04:06 AM PST
Acquisition 104.2 (Mac OS X)
whenever the program has been running for any lengh of time my cable connection goes dead. I am then forced to shut everyhing down and restart my router and cable modem to get connectivity back. Earlier versions did not do this. Very frustrating and I really liked this program up to this point. Anyone else having this problem mail me at j.bucholtz@insightbb.com. [alert admin]
Post a comment | More Info | 1 of 1 users found this helpful
Tuesday, January 13 2004 @ 06:04 PM PST
Symantec Norton AntiVirus 9.0.1 (Mac OS X)
Direct from the Symantec site If you are seeing the error message "Norton AntiVirus AutoProtect could not continue. Please reinstall Norton AntiVirus and restart." On the Go menu, click Applications. Open Utilities. Open Terminal. At the prompt, type or copy and paste, the following text: sudo touch /System/Library/Extensions When asked for your password, enter your administrator password, then press return. Quit Terminal. Restart your computer. The error message should no longer appear at startup. [alert admin]
Post a comment | More Info | 1 of 1 users found this helpful
Sunday, December 28 2003 @ 06:29 AM PST
LimeWire X 3.6.14 (Mac OS X)
Version 3.6.15 is out and won't launch
I dumped Limewire months ago and have been using Acqlite, Acquisition and Poisoned with good results. I thought I would give this another try based on some of the reviews below. I downloaded, installed and all seemed fine until I click the "later" button when asked to upgrade to Pro. Then the program crashes immediately. I went to the Limewire site and found 3.6.15 was out and had "addressed" the 10.3.1 Panther issues. I downloaded and installed it and got the same thing. I'll stick with the 3 above for now or maybe forever. [alert admin]
Read Comments (1) | More Info
Saturday, November 29 2003 @ 06:19 AM PST
Camino 0.7.0 (Mac OS X)
Nov. 5th Build Launches under Panther
I got the Nov 5tth build last night and it launches perfectly under Panther 10.3 on a G4 AGP with a Powerlogix 1.4 GHz processor upgrade, Radeon 64Mb graphics and 51Mb RAM. This has been my default browser and will continue to be - just a little bump in the road with the nightlies. [alert admin]
Thursday, November 06 2003 @ 03:14 AM PST
Camino 0.7.0 (Mac OS X)
I am having the same trouble as below. It ran fine this morning, I downloaded the new build and now it won't launch at all. I trashed everything (after backing up bookmarks) and tried a clean install of the program but got the same thing. Now it won't run period! Still love the program and will continue to use it as my default as soon as this is figured out. [alert admin]
Sunday, November 02 2003 @ 11:41 AM PST
Last 10 Comments by jbucholtz [ Search for All ]
I am running a 20" iMac (Early 2006) with a Core Duo processor. I had absolutely no issues with the install of thereafter. If you follow the install instructions there should be no problems running anything. I am in commercial and digital printing and have always done my heavy work on the Mac side. However I use Windows for other things (some light and some heavy duty processor loads). Most recently, my teenage son was diagnosed…
Original feedback item : Read More(1 words)
Wednesday, October 22 2008 @ 06:55 PM PDT
All you have to do is check the box for "fit to dvd compression" and it will compress as needed, on the fly. I have used this option without any problems for as long as I can remember.
Original feedback item : Read More
Monday, March 17 2008 @ 11:39 AM PDT
I have been using Toast 8 since it came out and to date have only ever made one coaster due to no sound and that was my error. I use Verbatim discs and either the Apple drive or a Lacie external drive (somethimes both at the same time for copies) and have had zero problems. I run a 20" iMac Intel Core Duo with first, Tiger and now Leopard. As per the previous reply, try…
Original feedback item : Read More(1 words)
Monday, March 17 2008 @ 08:06 AM PDT
I have had mine since last November. I run a 50" Sony LCD, BOSE Home Theatre and Dish High Def, dual tuner DVR among other things (lights and even my coffee maker). This goes all over the house and never a bit of trouble with it. And, it has been dropped on a hardwood floor two times minimum. Software running on an iMac 20" 2GHz Core Duo Intel machine, and again, absolutely no problems.
Original feedback item : Read More
Monday, May 21 2007 @ 12:07 PM PDT
I think I'm turning Japanese...
Click on one of the 2 links o the right of the mirror site name and it will download just fine. - Jeff
Original feedback item : Read More
Saturday, August 20 2005 @ 09:49 AM PDT
