Existing users, 
I have this setup with an iBook with Mac OS 10.3.9, Epson Stylus Photo RX425, Gutenprint-5.0.0rc2 and a Belkin Wireless G USB Print Server. With my other Dell Inspiron running Windows XP the printer works fine. On the iBook despite all my efforts including various Gutenprint forums. I am still unable to successfully print from the iBook. The message I get is 'Remote host did not accept data file (32). All help is welcome as despite looking at the cupsd error file. I can't fathom what is the problem. It just seems that certain characters are not being accepted by the printer.
Thanking any in advance for the help.
Gutenprint
Drivers for Canon, Epson, HP, Lexmark, PCL & more printers.
Version: 5.2.4
Mac OS 10.3.9+Epson Stylus Photo RX425+Gutenprint-5.0.0rc2 + Belkin Wireless G USB Print Server
Feedback Type: Troubleshooting Report
Contributed by: JTB63 Sunday, January 22 2006 @ 02:36 PM PST
Product Platform: MacOSX
Used Product For: Less than a month
System Info:iBook with Mac OS 10.3.9, Epson Stylus Photo RX425, Gutenprint-5.0.0rc2 and a Belkin Wireless G USB Print Server.
Comments
Mac OS 10.3.9 Epson Stylus Photo RX425 Gutenprint-5.0.0rc2 Belkin Wireless G USB Print Server - prevost
hi,i am having a similar problem with a brother hl-2030 printer and a linksys psus4 swith/print server.
the mac is os 10.4. it can see the printer, but when i try to print i get "remote host did not accept data file (32)"
i suspect the printer queue but i can not find how to change it. any help would be very much appreciated !
scott
ps : i also tried to print using ipp and got an error message that the printer does not support ipp 1.1. if anyone has any ideas on how to go back to ipp 1.0 that would be brillant...
Thursday, November 30 2006 @ 01:59 AM PST
Mac OS 10.3.9+Epson Stylus Photo RX425+Gutenprint-5.0.0rc2 + Belkin Wireless G USB Print Server - Rogue
I have had this problem. It wasn't to do with any drivers.I was trying to setup a HP on a netgear printserver. I was getting the same error.
It turned out to be the printers address.
Printer was at IP 192.168.0.169, which the Mac could see it but it wouldn't print.
when I changed the Print Queue to P1 (print server had two ports) so it Queue name looked like "P1_on_192.168.0.169" or looking in the cups (127.0.0.1:631) the printer was at "lpd://192.168.0.169/P1" as soon as I did this the errors went away.
I can't remember how I found the queue name, but there must be a way.
See if that works?
Reply to This
Sunday, January 22 2006 @ 06:53 PM PST